Open 7 days, 7am–10pm

Fully insured · every job tested & certified

Bristol & surrounding areas

sales.pb.electrical@gmail.com

Fault finding & call-outs

Electrical Repair in Bristol

Tripping RCDs, dead sockets, flickering lights, burning smells and loss of power: found, fixed and certified by qualified electricians. Open 7am to 10pm, seven days a week.

Electrician opening the cover of a FuseBox consumer unit to test the circuits
  • Fully insuredDomestic and commercial work
  • Tested & certifiedThe right certificate for every job
  • Open 7 days7am–10pm, including weekends
  • Free quotesNo-obligation, explained up front

Electrical repairs

Electrical faults found and fixed properly

When something electrical stops working, you want it found and fixed properly, not patched. We trace faults to their cause, explain what we found in plain English, and repair it safely, whether it is one dead socket or a board that trips every time the kettle goes on.

Most electrical repair calls we get in Bristol start the same way: an RCD that won’t reset, lights flickering, a socket that has gone dead or scorched, or part of the house without power. Water is a common culprit too. One of our recent jobs was a full kitchen rewire after a major leak had got into the circuits.

We answer the phone from 7am to 10pm, seven days a week. For anything that feels unsafe, call us rather than filling in the form.

Electrical faults we repair

  • RCDs and breakers that keep tripping
  • Dead sockets, switches and circuits
  • Flickering or buzzing lights
  • Burning smells, scorched or hot sockets
  • Partial or total loss of power
  • Faulty fused spurs, isolators and outside sockets
  • Water damage to circuits and fittings
  • Damaged cables, including after DIY or building work
Request a Callback

Warning signs

Signs you need an electrician

If you notice any of these, get the circuit checked. Anything involving heat, burning, water or shocks needs attention straight away.

  • Your RCD keeps tripping

    Nuisance tripping is the board telling you something is leaking to earth. It is often one appliance, sometimes damp or a damaged cable.

  • A burning smell or scorch marks

    Heat marks on a socket, plug or switch mean a loose or overloaded connection. Switch off and call us.

  • Lights flicker or dim

    A loose connection in a switch, fitting or junction box is the usual cause, and it gets worse over time.

  • A socket or circuit is dead

    If resetting the breaker doesn’t bring it back, or it trips straight away, there is a fault on that circuit.

  • Water has got into the electrics

    After a leak or flood, circuits need testing before they are used again, even if they seem to work.

  • Shocks or tingles from fittings

    Any shock, however small, is a safety issue. Stop using the fitting and get it checked the same day if possible.

Urgent problem?

Emergency electrician in Bristol

No power, a burning smell, sparking, or a fitting that has been hit by water: call 07950 840710. We answer from 7am to 10pm, seven days a week, and will get to you as quickly as we can.

While you wait

  1. If it is safe to do so, switch off at the consumer unit (the main switch) or the affected breaker.
  2. Do not touch anything that is scorched, wet or sparking, and unplug nearby appliances only if you can do so safely.
  3. If you smell burning or see smoke and cannot isolate it, leave the property and call 999.
  4. Check whether your neighbours have power too. If they don’t, it may be a network fault: call 105.

Fault finding

How we find the fault, not just the symptom

Good fault finding is methodical. We start with what you have noticed and when it happens, then isolate the circuits one at a time to narrow it down. An RCD that trips at random is a different problem from one that trips every time a particular appliance switches on, and the fix is different too.

Our test instruments tell us what the eye can’t: insulation resistance testing shows where a cable or accessory is breaking down or has taken on moisture, continuity testing confirms connections are sound, and RCD testing checks the device trips as fast as it should.

Once we know the cause, we explain it and agree the repair with you before we carry it out. Afterwards the circuit is tested again, so you know the problem is actually fixed.

FuseBox RCBO consumer unit fitted during a kitchen rewire after a water leak
After a major leak: a full kitchen rewire and a new RCBO consumer unit with surge protection.

How it works

How an electrical repair works

  1. Call or request a callback

    Tell us what is happening. For urgent problems, ring 07950 840710 so we can advise you straight away.

  2. We find the cause

    We test and isolate circuits to find the fault, then explain what we found and what it will take to fix.

  3. Repair, done properly

    Faulty parts replaced, connections remade and damaged cable dealt with, keeping mess to a minimum.

  4. Tested and certified

    The circuit is re-tested before we leave and you receive the right certificate for the work.

Costs

What affects the cost of an electrical repair

Every fault is different, so we don’t publish fixed prices. These are the things that make the difference, and we will talk you through them before any work starts.

  • Finding the faultAn obvious damaged socket takes minutes. An intermittent fault on a long circuit takes longer to trace.
  • Parts and accessoriesLike-for-like replacements are simple. Upgrades such as RCBOs or a new board cost more.
  • AccessFaults under floors, behind kitchens or in finished walls take longer to reach and make good.
  • The state of the wiringIf testing shows the wider installation needs attention, we will tell you and quote separately.
  • CertificationMost repairs need a certificate. It is included in our quote, never added on afterwards.

Areas

Electrical repairs across Bristol

From our base in Lockleaze we cover the whole city and nearby South Gloucestershire, including:

All areas we cover

PB Electrical Bristol Ltd
12 Stottbury Road, Bristol BS7 9NG

Open in Google Maps

Reviews

What our customers say

Rated 5.0 out of 5 from 13 Google reviews, and all 59 of our ratings on Rated People are five stars.

  • Max and the team worked quickly and tidily, and talked me through sensible options for the job. Really pleased.

    Rob, BS41 · Electrical installation & testing

  • Quick to reply, respectful in the house and careful to protect the work area. The oven and hob installation was finished to a high standard and everything was left clean.

    Kim, BA2 · Oven & hob installation

  • I usually dread having tradespeople round, but this visit restored my faith. The work was done quietly and efficiently and I was kept informed the whole way through.

    Alan, HR1 · Electrical work

Reviews summarised from verified customer reviews on Rated People, shown with the reviewer’s first name and postcode district.

FAQs

Electrical repair FAQs

Common questions about faults, tripping and emergency call-outs.

Why does my RCD keep tripping?

The most common causes are a faulty appliance (kettles, washing machines and outdoor equipment are frequent offenders), moisture in an outside socket or light, or damaged cable. Try unplugging everything on the affected circuit and resetting. If it still trips, or trips again when you plug one thing back in, you have found a clue. Either way, we can test and fix it.

Can you come out for an electrical emergency?

Yes. We answer from 7am to 10pm, seven days a week. Call 07950 840710, tell us what is happening and we will advise you on making it safe while we arrange the earliest visit we can.

Is a burning smell from a socket an emergency?

Yes. Stop using the socket, switch off the circuit at the consumer unit if it is safe to do so, and call us. If there is smoke or you cannot isolate it, leave the property and call 999.

Do you repair water-damaged electrics?

Yes. After a leak, circuits need insulation resistance testing before they are used again. Depending on the damage we dry out and repair, or replace the affected wiring. We recently rewired a Bristol kitchen after a major water leak.

Will I get a certificate after a repair?

Yes. Repairs are tested on completion and certified. Small repairs usually come with a Minor Electrical Installation Works Certificate. Larger work, such as a new consumer unit, gets a full Electrical Installation Certificate.

Do you give free quotes for electrical repairs?

Yes. Tell us what is happening when you call or request a callback and we will explain the likely options and cost before any work goes ahead.

Get a free quote

Report a fault or book a repair

Leave your name and number and we’ll call you back during our opening hours, 7am to 10pm. For anything urgent or unsafe, please ring us instead.

Request a Callback

Takes less than a minute. Name and phone number are all we need.

Free, no-obligation quotes. We only use your details to reply to your enquiry. See our privacy policy.